Can I Uninstall Old Versions of Sage?

Sage software is one of the most favored for accounting purposes. It is used for all from small tasks to complicated dealings in day-to-day accounting life.

It mainly is involved in managing the finance sector for any concerned business firm accordingly.

With such favored software, Sage proposes various versions that are formed with different dealing capabilities. Users are having a wide variety to choose the optimum version according to their suitability of the required software. These versions are quite brief and exceptionally good with their structured set programming skills for the job.

Oftentimes, there comes a need when a user is faced with the most common situation of upgrading their Sage version. This is often done for the reasons of a better working atmosphere and to make use of advanced features in new versions.

Read More-: Sage 50 Removing Installation Backups Stuck Error

Now, you might be wondering what one is in a situation where they need to install a new version of Sage and get rid of the older version. Such questions will cloud your mind, “can we uninstall the older version of Sage?”, “How can we get rid of the older version or sage altogether?”. Well, let’s put a full stop to your confusion at once. For that, the answer to your question is Yes, it is possible to uninstall old versions of Sage and it is an easy procedure if performed accurately.

For figuring out the procedure and all other related information is listed below. Stick to this article to know all.

At certain times when you begin to uninstall the following procedure, there are a few issues that occur and hinder the progress of the procedure. To alter the expected issues, let’s proceed with the information below.

What challenges did you have when attempting to remove Sage?

When attempting to remove Sage, you may run into a number of issues. Here are some of the problems you could run across while uninstalling:

1. One of the most common is, All of the files were not erased successfully.
2. The Sage file is also used by another technique or piece of software.
3. Sage cannot be deleted because the user does not have the requisite permissions, this can be another reason as well.
4. It can be also because the needed file could not be run, and the uninstalling operation was interrupted.

Now, usually before attempting to proceed with any procedure, there need specific steps to be done before the process starts.

Resources -:

https://www.facebook.com/accountingadvice.co/posts/1691892161203077

https://www.facebook.com/accountingadvice.co/posts/1691163964609230

Is it possible to Uninstall old versions of Sage? 

Yes, as per the information stated above it is possible to Uninstall old versions of Sage. For doing the same there are certain steps that are required to be carried out in an accurate manner in order to avoid any possible errors.

The steps to remove old versions of Sage are as follows:

1. For the foremost step, proceed to press the Window Key + R key combination.
2. After the above-mentioned step, continue to type Control Panel and then hit on OK.
3. Next, hit on Programs and features.
4. Thereafter, on the version of Sage Accounts right-click on the same to remove the same.
5. Finally hit on the option Uninstall.

What should you do before attempting to uninstall Sage 50 completely? 

If you want to reinstall Sage Accounting, save a note of your current program version and activation information, as well as a backup of your registry. You must take the following steps:

1. Determine the current version of your software

To discover your current Sage version, follow these steps:

If you can use the program, then you can:

• First, log in to Sage accounting software as a manager.
• Next, Then select the Help option.
• Now, Select About from the help menu.
• Finally, make a note of the Version Number in the left column of Program Details.

Read Also-: Information Federal 1099 Form 2017-18 Filing Requirements Due Date

If you are unable to use the application, take the following steps:

• To begin, on your keyboard, hit the Windows key + R.
• Then, after typing appwiz.cpl, press Enter.
• Finally, on the list, locate the most recent version of Sage Accounts and write it in the Version box.

1. Write down your activation details

You must double-check your serial number. To record your activation information, follow these steps:

• First, log in as a manager to Sage accounting software.
• After that, choose Help.
• Following that, go to About.
• Finally, look under the License Information section for your:.
• Activation of a Serial Number Account Identification Number.

1. Creating a backup of the entire registry or of a single registry key

To back up the whole registry or a single registry key, use the following methods:

• To begin, simultaneously hit the Windows and R keys.
• Then enter Regedit and press OK.
• When you visit the register, you’ll see two panels.
• On the left side, right-tap the registry key you want to back up and select export.
• Then, choose the desired Export Range at the end of the export registry file.
• The file should then be renamed.
• After you’ve renamed it, click the Save button.
• The registry key will then be saved as a .reg file.

Now that you are crystal clear with the steps to carry out before performing the procedure and know how to delete old versions of Sage, let us move to the instructions for getting rid of Sage software completely.

How to Remove Sage Completely

Here are several options for getting there quickly: Follow these instructions to completely remove Sage.

Resolution 1: Use Windows to uninstall your software

To delete apps on Windows, follow the steps below:

1. Use Windows key + R to open the Control Panel, then type Control Panel and hit OK.
2. Then choose Programs and Features.
3. After that, identify and right-click the Sage version you want to remove.
4. Go to, C: Program Files for the 64-bit operating system (x86)
5. SageAccounts.
6. SageAccounts is located in C: Program Files for the 32-bit operating system.
7. Once you’re done, select Uninstall.
8. Reinstall the program to see if the problem persists.
9. Finally, if the problem persists, return to step 2 and uninstall all Sage 50 versions before proceeding.

Resolution 2: To remove shared files from the System32 folder

To delete shared files from the System32 folder, follow the steps below:

1. To begin, navigate to C: WindowsSystem32 by pressing the Computer button. (For Windows 64-bit, go to C: WindowsSysWOW64.)
2. Then choose View, followed by Details.
3. Now, press Alt to enter the View menu.
4. Thereafter, right-click any column heading.
5. Then, under More, check the box next to Company.
6. Then, click the OK button.
7. Remove all files with the following names from the Company column: Filename

• Sage (UK) Limited
• Sage (UK) Ltd
• Sage
• The Sage Group plc
• Sage Software Ltd

1. To arrange the list by company, click the company column heading.
2. Sage files may then be deleted in bulk rather than individually.
3. Get rid of any Sage-related files.

Resolution 3: To remove DSN and ODBC data source

Follow these procedures to delete DSN and ODBC data sources:

1. First, log in to the computer as an administrator.
2. Now, To open the ODBC Data Source Administrator window, perform the following steps:

• Windows 32-bit users should use Windows + R, type ODBCAD32, and then press OK.
• Double-click C:WINDOWSSYSWOW64ODBCAD32.EXE on 64-bit Windows.

1. Finally, delete any Sage Line 50 entries from the User DSN and System DSN tabs.

Resolution 4: Uninstall the software from the Programs and Features menu

To remove from the Programs and Features menu, follow these steps:

1. For the foremost step, choose Programs and Features.
2. Next, Windows 7 and Vista are now supported.

• Go to the Start screen.
• Then enter the program and uninstall it.

1. Thereafter, in Windows 8, 8.1, or 10, press the Windows Key and X simultaneously to access Programs and Features.
2. To begin, navigate to Sage 50 and select uninstall.

Resolution 5: Remove any shared Sage files

To delete the shared sage files, follow the procedures below:

1. To begin, browse to the file for each of the following files, then double-check that it is a Sage file:
2. Now, proceed to Begin by right-clicking the file.
3. Next, there are also properties.
4. Once the above step is mentioned, Then choose the Version tab.
5. Now, choose Company Name.
6. When finished, double-check that the company name is Sage (UK) Limited or Sage.
7. If it’s a Sage file, right-click it and choose to uninstall.
8. If they still refuse to uninstall, press Windows key + R and go to the following directories, removing any Sage-related files and folders.

• C:\Windows\Assembly\GAC
• C:\Windows\Assembly\GAC_32
• C:\Windows\Assembly\GAC_MSIL
• C:\Windows\Microsoft.NET\assembly\GAC_MSIL

1. Next, Delete the following directories from

• C:\Windows\Microsoft.NET\assembly\GAC_MSIL.
• SgEData
• SgELauncher

1. Finally, navigate to C: WindowsSystem32 and delete Sage account versions 24 through 27.

Resolution 6: Uninstall Sage and all items completely

To completely remove Sage and all products, follow these steps:

1. The foremost step begins, making a backup of all of your data to an external device or USB stick. (Please check our website for a step-by-step method.)
2. Now, Then navigate to the Control Panel and choose Programs and Features.
3. Finally, locate Sage 50 and choose the uninstall option.

Resolution 7: Uninstall the software from the Programs and Features menu

To remove from the Programs and Features menu, follow these steps:

1. First, choose Programs and Features.
2. Windows 7 and Vista are now supported.

• Go to the Start screen.
• Then enter the program and uninstall it.

1. Then, in Windows 8, 8.1, or 10, press the Windows Key and X simultaneously to access Programs and Features.
2. To begin, navigate to Sage 50 and select uninstall.

Conclusion

The above-presented information has effectively guided you through the entire concept of Can I Uninstall Old Versions of Sage. All the optimum steps are listed here and also the step-by-step guide to processing the procedures.

All required actions are supplied, as well as the whole step-by-step approach guide.. The article covers all the required information for a detailed deeply involved information outlook. Follow this article to avoid any unnecessary errors.

If you are still facing any issues or have any doubts concerning the above-listed information you can connect with our customer helpdesk  .

Also Read -: Enable Bank Reconciliations in Sage 50

FAQs

1. Is it possible to update your activation details while taking note of your activation details before you begin removing Sage completely?

Yes, you may change your activation information by taking the following steps:

First, Select Tools first, then Activation, and lastly Upgrade Program.

Second, Provide your serial number, activation key, and account number if necessary.

Third, after selecting Continue, click OK.

2. Can one delete the shared files to delete Sage completely? 

Yes, one can delete Sage completely by deleting shared files.

First, To begin, scroll to and right-click each of the folders listed below.

Second, to destroy the folder, hit the delete button.

3. Do you need to uninstall Sage Software and associated accounting files in addition to Sage?

Yes, you must uninstall Sage Software and associated accounting directories as well as Sage in order to completely uninstall Sage.